Led Technologies
Find Us on Facebook

M&R Presses

Predator LPC

predatorLPC_overview2Predator LPC
Predator LPC is a uniquely versatile high-volume printing system that delivers exceptional results on cut-piece goods. It also excels on finished goods like flags, banners, and towels. Predator’s specialty is the edge-to-edge and all-over printing typically done using water-based inks. Predator LPC is available in 4, 6, 8, and 10-color models, with maximum image areas up to 97 x 213 cm (38” x 84”). All models feature servo-driven indexers, electric printheads, and multiple print-stroke capability.

 

Renegade

renegade_overviewRenegade
Renegade is the most compact press in the Renegade Series. Designed for high line-count four-color process printing, Renegades produce exceptional results by allowing pressure to be focused on the image area. Standard features include repositionable squeegee/floodbar pressure cylinders and Job Recall™, which allows operators to store settings like peel ratio, dwell time, and start and duration times for blowback and vacuum. These settings can be recalled later for repeat jobs—or for any jobs requiring similar settings—significantly reducing setup times.

 

 

Saturn Platinum II

saturn_PII_overviewSaturn Platinum II
Saturn Platinum II sets the standard for high tolerance printing in a compact press, with a level of control and quality normally found only in large, expensive presses. It’s ideal for applications where absolute precision is critical, delivering exceptional results on circuit boards, nameplates, panels, backlit graphics, flexible membrane switches, glass, ceramics, and four-color halftone printing. Saturn Platinum II uses separate motors for lift/lower and print/flood. The variable-frequency AC electric drive motors are brushless and maintenance-free. Saturn Platinum II’s heavy-duty, chatter-free design and flat metal-alloy vacuum bed provide the rigidity and stability necessary for high-quality prints and long press life.

Renegade XL

renegade_XL_overviewRenegade XL
Renegade XL is the extended version of M&R’s innovative line of flatbed graphic presses. By allowing operators to add additional pressure to the center of the squeegee and floodbar with two independently controlled center cylinders, Renegade XL helps ensure uniform pressure across the length of the squeegee. Standard features include Job Recall™, which allows operators to store settings like peel ratio, dwell time, and start and duration times for blowback and vacuum. These settings can be recalled later for repeat jobs—or for any jobs requiring similar settings—significantly reducing setup times. Renegades deliver superb print quality on virtually all substrates, including posters, banners, vinyl, fleet-marking, glass, metal, and display panels.

 

MultiGrip

Multigrip_Overview1MultiGrip
MultiGrip merges patented innovations, premium construction, and the industry’s largest network of service and support into the finest high-speed multi-color gripper system available. MultiGrip’s compact modular design delivers unrivaled performance today and an upgrade path to more colors tomorrow. And MultiGrips are fast, flexible, reliable, and simple to operate. The separation of print/cure functions allows simultaneous printing and curing to maximize press speed.

 

View Printable Product Literature (PDF 1673KB)

Renegade LS

Renegade_LS_overviewRenegade LS
Renegade LS is the largest version of M&R’s innovative line of flatbed graphic press. Standard features include Job Recall™, which allows operators to store settings like peel ratio, dwell time, and start and duration times for blowback and vacuum. These settings can be recalled later for repeat jobs—or for any jobs requiring similar settings—significantly reducing setup times. Renegades deliver superb print quality on virtually all substrates, including posters, banners, vinyl, fleet-marking, glass, metal, and display panels.

Processor II E

processor2E_overviewProcessor II E
Processor II E is simply the finest inline multi-color print/cure system available. It has larger four-post shafts and enclosed heavy-duty printheads with extrusions twice as wide as the previous generation. Features include master touch-screen control panels at the load and unload stations, with secondary touch-screen panels at each printhead. Printhead and UV settings can be controlled from any touch-screen. Processor II E can support up to eight cameras feeding video into an oversize display panel, allowing operators at the load and unload stations to closely monitor each printhead and the unloading process.

Insignia & Insignia B-Zero

insignia_overview_11Insignia & Insignia B-Zero
M&R’s most aggressively priced multi-color UV system prints and cures up to six colors simultaneously. Since substrates don’t need to be dried and stacked between colors, they don’t have to be handled repeatedly. This prevents dimensional changes to substrates, and is especially beneficial for fragile substrates like glass. Since Insignia delivers finished prints in one revolution, it’s possible to do color and registration adjustments for customer approval prior to the production run.

 

Conquest

conquest_overviewConquest
Conquest is M&R’s versatile multi-color UV carousel printing system. Its unique design reduces labor costs by printing and curing up to six colors simultaneously. Since substrates don’t need to be dried and stacked between colors, they don’t have to be handled repeatedly. This prevents dimensional changes to substrates, and is especially beneficial for fragile substrates like glass. Since Conquest delivers finished prints in one revolution, it’s possible to do color and registration adjustments for customer approval prior to the production run.

Sportsmen EX

SportsmanEX_OverviewSportsman EX
M&R’s Sportsman EX automatic textile presses offer exceptional value and quality at an amazingly affordable price. Sportsman EX 1618 is available in 6, 8, and 10-color models with a maximum image area of 41 x 46 cm (16” x 18”). Sportsman EX 2020 is available in 6, 8, 10, and 12-color models with a maximum image area of 51 x 51 cm (20″ x 20″). All models feature electric printheads, servo-driven indexers, multiple print-stroke capability, and a new color touch-screen interface with graphical displays and icon-based labeling that can show information and commands in numerous languages, simplifying press operation and training anywhere in the world. Also included are onboard self-diagnostics and real-time production data display.

 

Sportman DPE

sportsman_DPE_overview_1Sportsman DPE
Sportsman DPE has the same simplicity of operation and performance-proven dependability as the Sportsman E, but with room to place flash units between print stations. Sportsman DPE’s eight printheads and 18 stations enable users to flash between each printhead and still print up to eight colors. Sportsman DPE has a maximum print stroke length of 72 cm (28.5″) and a standard image area of 41 x 46 cm (16” x 18″). Sportsman DPE’s maximum image area (without flash cure units in place) is an impressive 76 x 72 cm (30” x 28.5”). All models feature servo-driven indexers, electric printheads, and multiple print-stroke capability.

 

Encore

Encore_Overview_faded_1Encore
Encore is M&R’s newest oval-shaped press, and it’s designed specifically for the needs of cut-piece operations. Built around a 10-station base module Encore is available in 10, 18, 26, 34, and 42-station configurations. The press can rotate in either direction, and models can be set up so that each printhead is followed by one open station (print/flash) or by two open stations (print/flash/cool). No cut-piece press is more flexible. Since Encore’s oval shape takes up less floor space than comparable carousel presses, it makes more efficient use of available production area. This also allows the Encore to fit into spots where no carousel press could. Cleverly-designed safety skirting surrounds the press, and the fully-enclosed ends can be used to stack substrate or to provide easy access to print-related materials. Encore has a maximum image area of 50 X 70 cm (20” X 28”).

 

Challenger III

Challenger3_Overview1Challenger III
Challenger revolutionized screen printing in the 1980s, and Challengers have dominated the industry ever since. Now, M&R’s all-new Challenger III expands on that tradition by combining innovative patented and patent-pending features—like M&R’s Revolver Print Program—with exceptional speed and the best ideas from over 20 years of M&R automatics. Challenger III’s indexer enables double indexing in one uninterrupted motion, increasing production speed for oversize work by eliminating the pause between indexes. Like Alpha 8, Challenger III’s printheads also feature calibrated tool-free click-stop four-corner off-contact settings for fast and accurate screen leveling. Built from the ground up to optimize speed, performance, flexibility, print quality, and durability, Challenger III is ready to dominate.

 

Alpha 8

Alpha8_68671Alpha 8
Alpha 8 is M&R’s exciting new take on the oval-shaped press. It’s modular and expandable—and can be configured for almost any production requirement. Since Alpha 8’s oval shape takes up less floor space than comparable carousel presses, it makes more efficient use of available production area. This also allows the Alpha 8 to fit into spots where no carousel press could. Alpha 8 is available in 3 models: Alpha 8 5070, Alpha 8 6080, and Alpha 8 80110. These offer maximum image areas of 50 x 70 cm (20” x 28”), 60 x 84 cm (24” x 33”) and 80 x 110 cm (31.5” x 43.5″), respectively. Double-index mode on alternating printheads can produce images up to 99 cm x 70 cm (39” x 28”) on the 5070, 109 cm x 84 cm (43” x 33”) on the 6080, and 114 x 110 cm (45″ x 43.5″) on the 80110. The 8-station Base/Drive Module supports up to four printheads, while M&R’s Plug & Print™ modular design provides for expansion—in six-station increments—up to 62 stations on Alpha 8 5070 & 6080, and up to 50 stations on Alpha 8 80110. Alpha 8’s digital touch-screen control panel with icon-based labeling can display information and commands in numerous languages, simplifying press operation and training anywhere in the world.

 

Sportsman EXG

SportsmanEXG_OverviewSportsman EXG
Sportsman EXG is the successor to M&R’s wildly popular Gauntlet II. But while it’s built on the same foundation as Gauntlet II, Sportsman EXG has more standard features, greater maximum image area, and the ability to handle larger screen frames. It’s an exceptionally fast press with a large 51 x 51 cm (20” x 20) maximum image area, compact footprint, and aggressive pricing. Sportsman EXG is available in 12 and 14-color models, and offers a wide array of standard features, starting with a servo-driven indexer that combines higher press speeds with exceptional smoothness, consistency, and longevity; variable-speed electric printheads for smooth print strokes and exceptional control; central off-contact for fast, incremental single-lever adjustment of all stations simultaneously; and a color touch-screen control panel with graphical display that provides onboard self-diagnostics, real-time production data, and user-friendly control over most press functions. Sportsman EXG’s capacity for screen frame sizes up to 66 x 91 (26” x 36”) gives printers the ability to utilize their stock screen inventories.

 

View Printable Product Literature (PDF 544KB)

 

Diamondback

 

Diamondback_S_overview6Diamondback Series
The Diamondback Series is M&R’s line of versatile and highly-affordable entry-level presses. Diamondbacks are available with up to 9 printheads and in 8 and 10-station configurations. Maximum image areas range from 35 x 28 cm (14” x 11”) to 51 x 53 cm (20” x 21”). Diamondback presses feature servo-driven indexing to ensure smooth, accurate travel, and pneumatic screen clamps that facilitate rapid screen loading, hold roller frames without special adapters, and deliver excellent stability on a wide variety of screens. Each press has pneumatically-driven printheads; pneumatic squeegee/floodbar clamps with tool-free angle adjustment; pneumatic screen frame clamps; and pneumatic squeegee pressure regulators with pressure gauges on each printhead for exceptional control of print pressure. Diamondback squeegee/floodbar systems offer independently-set angle and calibrated pressure adjustments; front or rear print carriage stop position that allows operator to leave screens clear or flooded; independent squeegee & floodbar speed adjustments; and visual reference marks every 5 degrees to simplify squeegee/floodbar angle adjustments. Adjustable rear stroke length with tool-free adjustment maximizes print speed.

View Printable Product Literature (PDF 960KB)

Challenger III D

ChallengerIIID_overviewChallenger III D
M&R’s revolutionary Challenger III D, with groundbreaking Dynamic PrintStroke™, brings a new dimension to automatic textile printing. Dynamic PrintStroke™ provides programmable control over squeegee pressure, print/flood speed, print-stroke length, and print-carriage position and other settings. The squeegee pressure setting can be varied between print strokes, offering unparalleled control over ink deposit. These programmable print parameters—along with Ink Dip™, Ink Dam™, flash-cure, and other print settings—can be named, saved, and stored as a unique print program in M&R’s Job Recall™ storage & retrieval system. Operators can later recall that job for subsequent print runs. For similar but not identical jobs, the operator can save a copy of the job under another name and tweak those settings rather than starting from scratch. Stored jobs can even be sent electronically to other Challenger III D machines, providing large operations and contract printers with unprecedented convenience and control over production.

Abacus II

Abacus2_OverviewrevAbacus II
Abacus II combines M&R’s versatile numbering system with Chameleon quality, performance, and durability. This unique two-station numbering system features a 20-printhead Duo-Deck configuration, making it a breeze to print two-color numbers. Abacus II’s servo-driven indexing system, controlled by an advanced touch-screen user interface, allows perfect positioning of virtually any digit size or type. Unlike competing systems, there’s no question about which screen goes where in a master screen chase, nor about how to position an oversize screen containing multiple digits. Instead, users simply enter the dimensions of the digits to be printed and the desired gap between the digits. Abacus II does the rest.

 

 

Pre-Runner

PreRunner_overview_01Pre-Runner
Pre-Runner is M&R’s semi-automatic sampling/production press. It’s available in standard and oversize (OS) versions with respective maximum image areas of 66 x 71 cm (26” x 28”) and 112 x 97 cm (44” x 38”). Both sizes come in single-pallet and optional triple-pallet configurations. When combined with M&R’s Tri-Loc® Rapid Registration System, the triple-pallet index system turns Pre-Runner into the perfect sampling press. A Tri-Loc pallet is mounted in the center station to provide for screen registration. Conventional pallets are mounted in the other two stations for test printing and/or production runs. Because of its automatic-press-style printhead, Pre-Runner enables operators to refine and document automatic-press print parameters in a way that’s simply not possible on a manual press.

 

Chameleon

chameleon_overview3Chameleon
With its revolutionary two-tier design, unrivaled expandability, and rugged construction, Chameleon is without question the world’s best sampling and manual production press. M&R’s System Integration design allows Chameleon to integrate seamlessly with M&R’s Tri-Loc and Double Tri-Loc Registration System and any M&R automatic textile press to create the most phenomenal registration/sampling/production system available. And with Chameleon’s patented Duo-Deck™ design, four and six-color models can expand to ten colors and eight-color models can expand to fourteen colors, all without expanding the footprint of the press.

 

Sidewinder

sidewinder_overview_2011Sidewinder
M&R’s Sidewinder is the world’s best entry-level manual press, and it’s available at an exceptionally affordable price. Built with M&R’s rugged construction and innovative design, Sidewinder sets a new standard for entry-level manual presses. Sidewinder includes numerous proven design features, including multiple-bearing upper and lower carousel plates, precise micro-registration system, machined center shaft, and three-point pallet leveling system. Sidewinder comes in 4-station/4-color, 4-station/ 6-color, and 6-station/6-color models. And with Sidewinder’s expandable design, four-color models can be expanded to five or six colors to meet future production needs.

 

 

Sidewinder Solo

SideWinder-Solo-overview3Sidewinder Solo Series
Sidewinder Solo is M&R’s low-cost modular system for a wide range of screen printing applications. It’s a single-head version of Sidewinder, the world’s best entry-level manual press. Built with M&R’s rugged construction and innovative design, Sidewinder Solo can be used as a tabletop one-color press or mounted on a floor stand. It can also be equipped with a vacuum pallet system for printing flat stock or with an extra-wide screen holder and pallet for printing oversize and all-over designs. In addition, Sidewinder Solo’s printhead can be removed from its modular base and added to a four-color Sidewinder to expand the Sidewinder’s color capacity.

 

View Printable Product Literature (PDF 723KB)