Led Technologies
Find Us on Facebook

12 Volt

BITROPower Controller – BT-RDC

Bitro One-to-One Redundancy Module

Download the Brochure

Overview

In a low-voltage modular LED system, power supplies are the weakest link in the chain. Unlike LED module failures which are often not catastrophic, power supply failures always lead to system wide failure and product downtime that calls for immediate service calls by dissatisfied clients. In cases where power supply failure is unacceptable or extremely costly (i.e. industrial telecommunication devices, servers, military devices, etc.), power redundancy offers the benefit of exponential reduction in system failure rate, thereby reducing risk and cost. Bitro has developed a redundancy backup system optimized for class 2 low voltage LED applications! The BT-RDC module allows the use of any two class 2 power supplies to be configured to provide power with redundancy backup to one class 2 load of LED modules. The BT-RDC also offers 0-10V dimming function and short circuit protection in addition to it’s redundancy function – all in a single dry and damp location rated module. BT-RDC is an UL recognized component and backed by 5-year warranty.

 

How it works

  • For every set of LEDs powered by a class 2 power supply, the
    BT-RDC redundancy module is employed on the secondary side
    of the power supply, allowing for the use of an additional power
    supply to provide redundancy backup power.

 

  • Any class 2 power supplies can be used with the BT-RDC. This
    is made possible by the patent pending design of the redundancy
    module, where the BT-RDC logic seamlessly chooses the higher
    voltage of the two inputs to be provided as output voltage to the
    LED load – without any interruptions in power or LED operation.

 

  • This one-to-one (1 power supply + 1 backup) arrangement creates
    a situation where the only way for the LED power system to
    fail and require an immediate service call is if both power supplies
    fail. For instance, if each power supply connected to the BT-RDC
    has an expected failure rate of 1/1000, then the probability of
    system failure due to both power supplies failing would be 1/1000
    x 1/1000 or One-in-a-Million chance of failure! That is an exponential
    increase in system reliability over a typical set up with only
    one power supply.

 

  • The redundancy module prevents damage to either power
    supply due to reverse voltage, which can occur when using two
    power supplies with differing voltage outputs on other redundancy
    setups. BT-RDC also prevents short-circuiting of the LED load
    due to typical power supply failures, as it cuts off the failed power
    supply from the BT-RDC output, while seamlessly transferring the
    LED load to the non-failed power supply for continued operation.

Features

  • Creates a one-to-one power redundancy
  • Ideal for LED applications where extreme reliability is desired (i.e. high-rise buildings, sign pylons, etc.)
  • For use with two units of class 2 power supplies as input
  • Exponentially increases the reliability of the power supply system
  • Can be used with any class 2 power supplies
  • Dimmable with 0-10V control signal
  • Dry and damp location rated
  • UL Recognized Component
  • 5 Year Warranty

Bitro Alpha Series 60 Watt Power Supply

Bitro Alpha Slimline Series (ASU Series) power supplies are designed for LED lighting in signage and architectural applications. Bitro ASU power supplies are compact, durably constructed, and weather proofed for use in demanding environments. True universal input voltage, consistent DC output, high Power Factor, and 5 warranty make Bitro ASU Series power supplies a unique choice for reliable everyday power source for LED lighting. ASU Series power supplies are manufactured in North America.

Download the Brochure

Features

Single channel 60W, 12V DC Output, Class 2 UL
120-277VAC 50/60HZ True Universal Input
Compact and Slim Design to fit in raceways and cabinets
Pig-tail to Pig-tail leads
Dry and damp Listed
Full load at 60°C (140°F)
Over-Current, Short Circuit, Over Voltage Protection Features
Made in North America
UL & CSA Recognized under Sign Accessories
5-year Warranty

 

Ultra Slimline U16 Series

U16 60W 12V/24V Standard Input

Signage & Lighting LED Drivers

Download the Brochure

U16-60 T Series1

Overview

Bitro Ultra Slimline Series (U16 Series) power supplies are designed to fit into the tightest spaces for signage and architectural applications. The U16 Series was developed to address the need for slimmer power supplies; at 16mm thickness, the U16 Series are the thinnest power supplies in the industry. The ultra-slim form factor allows seamless integration of power supplies and lighting displays, making the U16 Series a unique solution for fabricators and architects.

 

 

 

 

Features

U16-60 T Series2

 

  • Compact and Ultra Slim Design to fit into tight spaces in light fixtures and signs
  • 90-126VAC 50/60Hz Input
  • Dry and damp Listed
  • Full load at 60°C (140°F)
  • Over-Current, Short Circuit, Over-Voltage and Overheating Protection Features
  • Pig-tail to Pig-tail leads
  • UL component recognized for Lighting & Signage use
  • 5-year Warranty

U16-60 T 4

 

 

France DRV-1260-E 60W 12V Class 2 LED Power Supply

 

Download the Brochure

 

No power de-rating required for the DRV-1260-E: Supports 100% 60W load across the entire operating temperature range. Light more LEDs with less power supplies, creating cost savings.

High electrical efficiency: Enables low energy costs and cool operation in a small package. Features an 85°C maximum case temperature. High Power Factor.

Maximum water-resistance: IP68 for use in dry or damp locations.

Features:

  • LED Drivers
  • 120 / 277VAC
  • 12V / 60W
  • IP67 – Dry / Damp
  • UL Listed Class P, Class 2
  • Length: 7.21″
  • Width: 1.97″
  • Height: 1.42″
  • Weight: 2 pounds

 

France LED-1260WMPS Compact Wet-Listed 60W 12V Class 2 LED Power Supply

A Fusion of Performance, Quality, Compact Size, and Value

Download the Brochure

 

No need to de-rate. Designed to operate reliably at full rated power at maximum rated ambient temperature.
IP68, for use in wet, damp or dry conditions. Compact wet-listed construction and conduit fittings for maximum water resistance.
Unit blinks LEDs when significantly overloaded. Integrated short circuit protection with automatic reset.
Low energy costs and cool operation in a small package.

Features:

  • LED Drivers
  • 120 / 277VAC
  • 12V / 60W
  • IP68 – Wet-Listed
  • Order ID: 19133
  • Length: 8.05″
  • Width: 1.97″
  • Height: 1.42″
  • Weight: 2 pounds

 

Allanson CV 125 LED Multi-Voltage Power Supply

CV125-120-277-2__15185.1518360829

Download the Brochure

Download the Allanson Power Supply Specifications Guide

Product Specifications

Output Watts: 60W
Part Number:CV125-120-277V
Input Voltage: 120-277
Input Current: 0.65A
Output Volts DC: 12
Output Current: 5A
Dimensions: 9.5in x 1.75in x 1.15in

Features

  • Fully encapsulated
  • High power factor
  • Short circuit protection
  • Overload protection
  • UL recognized Class 2 power supply
  • CSA components certified

 

Mean Well CEN-60 series 60W Single Output LED Power Supply

Download the Brochure

 

CEN-60 Series are a range of 60W IP66 rated PFC LED lighting power supplies offering wide ranging AC input voltages and adjustable output voltage and constant current levels. Compliant to worldwide safety regulations for lighting CEN-60 Series are suitable for application in dry, damp or wet locations and outdoors.

Features:

  • Universal AC input, up to 295VAC
  • Short circuit, over load, over voltage, over temperature protections
  • Output voltage and constant current level adjustable
  • Built-in active PFC function
  • IP66 design for indoor or outdoor installations
  • Cooling by free air convection
  • 100% full load burn-in test
  • High reliability
  • Suitable for LED lighting and moving sign applications
  • Compliance to worldwide safety regulations for lighting
  • Suitable for dry / damp / wet location and outdoor application

 

 

Meanwell LPV- 60 series 60W Single Output Switching Power Supply


Meanwell LPV 12v 60W 120v Power Supply Brochure

 

LPV-60 Series are 60W AC/DC enclosed, non PFC design, switching power supplies. LPV-60 models offer constant voltage mode and high IP rating to protect the electronic components from dust and moisture, making suitable for use in harsh locations. LPV-60 Series possesses high efficiency and can operate between -30°C ~ +70°C using only free air convection. To protect the unit from sudden high surge for unstable AC line, LPV-60 can withstand 300VAC input surge for 5 seconds.

Features

  • Constant voltage mode power supply
  • Universal AC input
  • Withstand 300VAC surge input for 5 seconds
  • Short circuit, over load, over voltage protections
  • Fully isolated plastic case
  • Cooling by free air convection
  • UL1310 Class 2 power unit, passes LPS
  • 100% full load burn-in test
  • Low cost, high reliability

 

Mean Well LPV-35 series 35W Single Output Switching Power Supply

Mean Well LPV 12v 35w 120v Power Supply Brochure

 

LPV-35 Series are 35W AC/DC enclosed, non PFC design, switching power supplies. LPV-35 models offer constant voltage mode and high IP rating to protect the electronic components from dust and moisture, making suitable for use in harsh locations. LPV-35 Series possesses high efficiency and can operate between -30°C ~ +75°C using only free air convection. To protect the unit from sudden high surge for unstable AC line, LPV-35 can withstand 300VAC input surge for 5 seconds.

Features

  • Constant voltage mode power supply
  • Universal AC input
  • Epoxy encapsulated with IP67 level
  • Withstand 300VAC surge input for 5 seconds
  • Short circuit, over load, over voltage protections
  • Fully isolated plastic case
  • Cooling by free air convection
  • UL1310 Class 2 power unit, passes LPS
  • 100% full load burn-in test
  • Low cost, high reliability

 

Mean Well LPV-20 series 20W Single Output Switching Power Supply

 

Mean Well LPV 12v 20w 120v Power Supply Brochure

 

LPV-20 Series are 20W AC/DC enclosed, non PFC design, switching power supplies. LPV-20 models offer constant voltage mode and high IP rating to protect the electronic components from dust and moisture, making suitable for use in harsh locations. LPV-20 Series possesses high efficiency and can operate between -30°C ~ +70°C using only free air convection. To protect the unit from sudden high surge for unstable AC line, LPV-20 can withstand 300VAC input surge for 5 seconds. UL879, UL1310 Class 2, CAN/CSAC22.2 No. 223-M91, IP67 approved

Features

  • Constant voltage mode power supply
  • Universal AC input / Full range
  • Epoxy encapsulated with IP67 level
  • Withstand 300VAC surge input for 5 seconds
  • Short circuit, over current, over voltage protections
  • Fully isolated plastic case
  • Cooling by free air convection
  • Small and compact size
  • UL1310 Class 2 power unit, passes LPS
  • 100% full load burn-in test
  • Low cost, high reliability

 

Mean Well GS 60 series 60WAC-DC Single Output Desktop Power Supply

 

Mean Well GS60-12 Brochure

 

GS60 Series are a range of 60W AC/DC single output desktop green power adapters providing 5V-48V DC Outputs. With standard IEC320-C14 AC input inlet and compact size GS60 Series fulfiles energy saving and environmental concerns as 92.1% of the unit can be effectively recovered, as per the WEEE regulation, and the unit complies with the latest Energy Star regulation and US California Energy Code (CEC level V). The energy saving elements of GS60 ensure the units have very low no load power consumption of <0.3W and up to 92.5% efficiency. These AC/DC adapters have also passed LPS tests and have aquired global safety certificates for TUV, UL, CUL, CB, BSMI, CE, BSMI, CE, FCC and CCC making them ideal for numerous applications including consumer electronics, IT & communications equipment and industrial devices.

Features

  • Universal AC input
  • No load power consumption <0.3W
  • Energy star(CEC) level IV compliant
  • Energy star(CEC) draft V2.0 level V
  • 3 pole AC inlet IEC320-C14
  • Class I power (with earth pin)
  • Short circuit, over load, over voltage protections
  • Fully enclosed plastic case
  • LED indicator for power on
  • Approvals: UL / CUL / TUV / BSMI / CCC / CB / FCC / CE